FTTH SC UPC Optical fiber quick connector SC FTTH Fiber Optic Fast Connector Embedded High Quality SC APC
Reusable manual connector for UPC polished SC standard FTTH networks for Drop Flat Fiber Cable.
Specifications:
The Reusable SC Connector Field Optical Fast Connector is designed for field use in Drop Flat (Low Friction) cables up to 3 mm and / or 2 to 3 mm Optical Cords in FTTH networks.
Easily assembled, it does not require any special tools other than standard fiber optic preparation tools (cable stripper, fiber stripper, cleavage guide, cleaver and cleaning components).
It is designed for simple and fast mechanical termination in the field, making it possible to reuse without losing its characteristics.
Features:
• Reusable connector without loss of features
• APC/UPC pre-polishing
• Simple and quick assembly
• Lower installation time 3 min.
• Low Insertion Loss = 0.3dB
• Return Loss: = - 40dB
• Reflection Rate: = 45 ~ 53dB
• Operating Temperature: -40 ~ + 75 ° C
Item Parameter
Cable Scope: 3.0 x 2.0 mm Bow-type Drop Cable
2.0/3.0 indoor cable
Fiber Diameter: 125μm ( 652 & 657 )
Coating Diameter: 250μm
Mode: SM
Operation Time: about 15s(exclude fiber presetting)
Insertion Loss: ≤ 0.3dB(1310nm & 1550nm)
Return Loss: ≤ -40dB
Success Rate: >98%
Reusable Times: >10 times
Tighten Strength of Naked Fiber: >5 N
Tensile Strength: >50 N
Temperature: -40~+85℃
On-line Tensile Strength Test: (20 N) IL ≤ 0.3dB
Durability: (500 times mating) IL ≤ 0.3dB
Drop Test:(4m concrete floor, once each direction, three times total) IL ≤ 0.3dB
Specifications
Size
3*5*3
Fiber Type
Single Mode
Connector Type
Hybrid
Compatible
Dell Force10, HP, IBM, H3C, Huawei
Connector Type
Hybrid
Model Number
FG